USB ELM327 V1.4 Plastic OBDII EOBD CANBUS ELM 327 Scanner Free Shipping

Feature
Supports 9 protocols in all - SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2 and ISO 14230-4 as well as CAN Bus ISO 15765-4.
Precision-moulded diagnostic connector made to fit all VW/Audi vehicles, even those with "tight" trim around diagnostic socket.
USB port design.
Internal EEPROM can remember the last protocol.
Voltage input monitors your vehicle's battery.

Technical Specification
ELM327 Based - Datasheet
OBDII Plug: J1962 16-Pin Male (to Car)
USB Port : (to Computer or PDA)
High quality UL certified USB Cable (equivalent to CE).
CAN (ISO 15765-4)
SAE J1850 PWM
SAE J1850 VPW
ISO 9141-2
ISO 14230-4
Automatically searches for the correct protocol or can be configured manually.
USB Port
Serial Interface uses AT commands to look like a modem.
Status LED
Length with USB Lead : 1.5 metres

New for v1.4:
General Items 
RS232 baud rates to 500 Kbps
Adaptive Timing automatically adjusts ST timeouts
Power up to AT MA is selectable
Source (tester) address can be changed
Can reset all PPs with a jumper
Receive addresses can be independently set
Power Control with a low power standby mode
A 4800 baud ISO option
A non-volatile memory location for storing user data
CAN extended addressing support
You can now perform ISO/KWP bus initializations without having to send a request
An SS command allows searching through the OBD protocols sequentially
A new TA command allows the Tester Address to be easily changed
Factory calibration for the voltage reading circuit can be easily restored
J1850: 
Complete control over in frame responses (IFRs)
Delay before protocol 2 helps with some GM/Holden vehicles
ISO 9141 and ISO 14230: 
The slow initiation address can now be varied
Control over key word checking
KWP protocols can now transmit 3 or 4 byte headers
CAN: 
New J1939 protocol
Two user-definable CAN protocols
Improved error handling and recovery
Extended addressing support

How To Use:
Turn the car's ignition switch ON. No need to start the engine.
Start the software program, click "Options", select the correct communications port.
Your interface now works! Make sure the software can reliably access all the control modules that it should in your car.

Package including
1pc x ELM327 V1.4 Interface
1pc x CD Driver

 
Company Introduction:
 
Shenzhen Shanhai technology LTD is a professional manufacturer of auto diagnostic tools, specialized in researching & developing diagnostic devices for BMW, Mercedes Benz, Ford, GM, Toyota, Honda, Renault etc. Meanwhile, we are an authorized agency for some famous companies, like Launch X431 ,Autel and  Autoboss.
As one of the top manufacturers in China, with our dedicated engineers, we are able to provide customers with high-tech products, technical support and after-sales service. Our products are sold to all over the world, including factories, distributors, agents, garages, shops and individuals. We still provide OEM and ODM service for our customers.
We have over seven years of experience in manufacturing and exporting these products from China to various overseas markets and we also cooperate with satisfied buyers in the US, Europe, South Africa, Southeast Asia and the Middle East. Relying on advanced instruments, perfect quality control system, highly experienced management staff and senior engineering personnel, we are able to satisfy customers' changing demands effectively.
 
Our company persists in the good service. "Quality, professionalism and innovation" is the belief of our enterprise. By listening to our customers' suggestions and needs, our marketing personnel are able to fulfill all requirements that they receive.
Providing best products and best service is our company target. Contact us today by email or phone and start with a small order, you will find we are your most valuable cooperator.